san pedro cactus masculine Buy San Pedro Cactus Phoenix, AZ | Echinopsis pachanoi
SKU: 464566950
san pedro cactus masculine

san pedro cactus masculine Buy San Pedro Cactus Phoenix, AZ | Echinopsis pachanoi

Sale price$22.47 Regular price$24.97
Save 10%

Pay in installments of $6.24 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jun 29 - Jul 4

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

san pedro cactus masculine Buy San Pedro Cactus Phoenix, AZ | Echinopsis pachanoiA Towering Columnar Cactus for Phoenix Desert Gardens San Pedro The San Pedro Cactus (Echinopsis pachanoi) is one of the fastest growing columnar cacti available for Phoenix landscapes. Native to the Andes Mountains, this striking blue green cactus grows tall, ribbed columns that branch with age into dramatic multi stemmed specimens. San Pedro can reach 1020 feet tall in the Phoenix Valley, adding bold vertical structure to xeriscape gardens,

A Towering Columnar Cactus for Phoenix Desert Gardens — San Pedro

The San Pedro Cactus (Echinopsis pachanoi) is one of the fastest-growing columnar cacti available for Phoenix landscapes. Native to the Andes Mountains, this striking blue-green cactus grows tall, ribbed columns that branch with age into dramatic multi-stemmed specimens. San Pedro can reach 10–20 feet tall in the Phoenix Valley, adding bold vertical structure to xeriscape gardens, courtyard plantings, and modern desert designs. It produces spectacular large white flowers that bloom at night during summer — a rare treat for any garden. Whether you’re creating a sculptural cactus garden in Scottsdale, anchoring a Chandler desert border, or adding architectural drama to a Mesa backyard — San Pedro delivers fast growth and jaw-dropping form.

San Pedro Cactus Plant Details

Attribute Detail
Scientific Name Echinopsis pachanoi (syn. Trichocereus pachanoi)
Common Names San Pedro Cactus, Saint Peter Cactus
Mature Height 10–20 feet
Mature Width 4–6 feet (multi-branched clump)
Growth Rate Fast for a cactus — 1–2 feet per year in Phoenix
Sun Full sun to light shade. Handles reflected heat well.
Water Low once established. Drought-tolerant but appreciates occasional deep watering.
USDA Zones 9–11 (Phoenix is Zone 9b–10a)
Soil Well-draining required. Thrives in sandy, rocky Arizona soils and handles caliche with drainage.
Foliage Evergreen — blue-green ribbed columns year-round
Bloom Large white nocturnal flowers in summer — fragrant and spectacular

San Pedro Cactus Uses in Phoenix Landscapes

Sculptural Focal Point & Cactus Gardens

San Pedro’s tall, ribbed columns create dramatic vertical architecture in any desert garden. Plant a single specimen as a living sculpture in a Scottsdale courtyard, or group 3–5 for a columnar cactus grove effect. Pair with Golden Barrel, Totem Pole Cactus, and Mexican Fencepost for an all-columnar desert statement garden.

Modern Desert Borders & Property Screens

Because San Pedro branches and fills in with age, it makes an effective living screen or border plant. Space 3–4 feet apart along a Chandler property line or Gilbert fence to create a striking green wall. The columns grow fast enough to provide meaningful screening within 3–5 years.

Pool-Friendly & Low-Litter Plantings

San Pedro is an excellent pool-adjacent plant — it produces virtually no leaf litter, requires minimal trimming, and its smooth columns and minimal spines make it safer than many cacti. Plant along Tempe and Mesa pool perimeters for a clean, architectural look with zero maintenance debris.

Best Time to Plant San Pedro Cactus in Phoenix

Spring (March–May) is the ideal planting window. Warm soil and rising temperatures promote fast root establishment and active growth. Fall (October–November) is the second-best option. Avoid planting in winter — San Pedro is slightly frost-sensitive and roots best in warm soil.

How to Plant San Pedro Cactus

  1. Dig wide, not deep — excavate 2x the root ball width at the same depth. Cacti have shallow root systems.
  2. Ensure excellent drainage — break through any caliche layer. San Pedro will rot in standing water.
  3. Backfill with native soil — no amendments needed. Sandy, rocky Arizona soil is ideal.
  4. Spacing — 3–4 feet apart for a border or screen; 5+ feet for standalone specimens.
  5. Let the cut callus — if transplanting a cutting, let the cut end dry and callus for 1–2 weeks before planting.
  6. Gravel mulch — 2–3 inches of decomposed granite or gravel. Never use organic mulch that retains moisture.

Watering San Pedro Cactus in Phoenix

First Year Watering Schedule

  • Weeks 1–2: Every 5–7 days, light watering to settle soil
  • Months 1–2: Every 7–10 days
  • Months 3–6: Every 10–14 days
  • After Year 1: Every 2–3 weeks in summer; monthly or less in winter

Drip Irrigation

Place 1 emitter (1–2 GPH) 12–18 inches from the base. San Pedro appreciates more water than most columnar cacti, which helps it maintain its fast growth rate. However, always let the soil dry completely between waterings. Overwatering causes root rot.

How fast does San Pedro grow in Phoenix?
San Pedro is one of the fastest-growing columnar cacti, adding 1–2 feet per year in Phoenix with regular summer watering. A 5-gallon plant can reach 6–8 feet within 3–4 years.

Is San Pedro frost-hardy in Phoenix?
San Pedro handles most Phoenix winters well, tolerating temps down to about 25°F. During rare hard freezes, drape frost cloth over the plant. Established specimens are more cold-hardy than young ones.

Does San Pedro bloom?
Yes — mature San Pedro cacti produce large, spectacular white flowers that open at night during summer. The blooms are fragrant and typically last one night, attracting moths and bats. Plants usually begin blooming once they reach 4–6 feet tall.

How does San Pedro compare to Totem Pole Cactus?
Both are tall columnar cacti, but San Pedro has visible ribs and small spines, while Totem Pole (Pachycereus schottii ‘Monstrosus’) is smooth and spineless with a knobby texture. San Pedro grows faster and produces showy flowers. Both are excellent choices for Phoenix desert gardens.

You May Also Like

  • Totem Pole Cactus — a smooth, spineless columnar cactus with a unique sculptural form.
  • Mexican Fence Post — a tall, columnar cactus often used as a living fence in desert landscapes.
  • Golden Barrel Cactus — a round, golden-spined cactus that contrasts beautifully with tall columnar species.
  • Ocotillo — a spindly desert native with fiery red spring blooms, perfect for adding movement to cactus gardens.

How Many San Pedro Cactus Do I Need?

San Pedro works two ways: as a single sculptural specimen, or branched together into a fast-growing columnar screen. For a focal point, plant one and give it 5 to 6 feet of clear space so the multi-stemmed form can spread. For a living screen along a wall or property line, space the columns 3 to 4 feet apart:

Run length Plants at 3.5 ft spacing
10 ft 3 plants
20 ft 6 plants
30 ft 9 plants
40 ft 11 plants

For a grove effect, group 3 to 5 columns in odd numbers, each 3 to 4 feet apart, so the ribbed stems read as one bold cluster.

San Pedro Cactus Season-by-Season in Phoenix

  • Spring (Feb-Apr): Prime planting window. Warm soil drives fast root establishment and the first flush of new column growth.
  • Summer (May-Sep): Peak growth season, adding 1 to 2 feet with regular deep watering. Large fragrant white flowers open at night and draw moths and bats. Handles full reflected heat off walls and pavement.
  • Fall (Oct-Nov): Second-best planting window and continued growth before cooling. Taper watering as temperatures drop.
  • Winter (Dec-Jan): Evergreen blue-green structure holds all winter. Hardy to about 25°F: during a hard freeze, drape frost cloth over the columns, especially on young plants.

At a Glance

✔ Heat-Loving (Reflected-Heat Tolerant)   ✔ Drought-Tolerant   ✔ Pollinator-Friendly   ✔ Pool-Friendly (Low-Litter)   ✔ Evergreen   ✔ Low-Maintenance   ✔ Deer & Rabbit-Resistant   ✔ Cold-Hardy to 25°F

Plant It With

Is San Pedro Cactus Right for Your Yard?

San Pedro thrives in full sun to light shade with fast-draining soil, and it tolerates reflected heat off walls and pavement better than most columnar cacti. Give it room to branch and break through any caliche layer so water never pools at the roots. It is not a fit if your spot stays wet or shaded, or if you cannot cover it during a rare hard freeze while it is young.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 464566950

Discover Niche Categories That Outsell san pedro cactus masculine

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 885 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
G
Verified Purchase
Grong 1969
Waukegan, US
★★★★★ 5
Sturdy and super strong
Color: Black-Mount
This product is very well made heavy duty no plastic parts basically all metal less than 1 % plastic. Pro's holds monitors easily and one of mine weights 19.8 pounds according to the manufacture and the other one without stand that came with it weights 25 pounds don't know what they were thinking when they built that one hard to find arms to support that. But this arm system takes it like a pro yes you have to pay attention to which way you turn the adjustment screws but they are clearly marked. Had no problem assembling it or putting it together two installs one for a clamp on the edge one for a hole. I used the edge clamp and that beast is not coming off. I did tighten one side and then the other went back and forth between the two main screws until I got them equally tight to insure the monitors would not fall. They cost way more than this arm system. Cons: There are 4 screws that hold the plate that holds the clamp screws plate. They are preinstalled and slip into a hole and slot configuration. Remove them completely and throw them out go to your local hardware store and get hardened screws they cost me about sixty cents apiece. I also got some washers and put them on the replacement bolts and affixed them so that the slot holes are basically just regular holes. I pushed the new screws down on the slot position and tightened. Now anyone that reads this I know is asking why? I'm 60 plus years old not a he-man or body builder never been actually been on the lighter side of strength. Not that I'm weak but in my day I have busted and broke things by overtightening those days are sadly gone. I did not use any extention or more commonly called a cheater bar on the allen wrench but 2 of the 4 screw heads stripped out and had to be removed with pliers. I also tried my set of allen wrenches on the screws thinking maybe cheap allen wrench no it was the screws that head that was I suspect too soft and it rounded out. Just pliers not vise grips so they were not terribly tight. I did not have to retap the holes so they were not cross threaded. 1 out of four that failed could be called a bad screw 2 out of four are cheap and not worth using and for that reason since they are a critical part of the clamp locking system I decided to get hardened screws which will probably not strip out or break the threads in the plate would probably tear out first and that would take some real doing. Outside of those screws and the expected failure of the cable holding plastic part that sits on the back of the clamp to hold cables and makes a nice place to store the allen keys to adjust the arm if needed that was a nice touch this thing is rock solid. Solution for the plastic cable holding part is simple a cable tie holds that in place yes it maybe a touch tacky but oh well hang me for wanting it to stay in place. Yes, I would recommend this to someone and have Yes, I think it is a good value Yes, I think it is going to last a long time and the gas shocks seem to be strong Yes, I would buy this again. No, I do not think the problem I had should deter anyone from buying this just be aware that these screws might be soft and probably should be upgraded before assembling this thing the first time. I would if the manufacture reads this recommend that they take a real good look at those screws and maybe see about getting a better grade. No I do not blame them they buy stuff and maybe not even be aware that the screws have a fair possibility of stripping out. But when someone puts $800.00 plus dollars on this it would really be stupid to have the problem I had and trust the other 2 screws to hold since I could not get 2 of them to tighten enough to take the wiggle out of the assembly.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2020
J
Verified Purchase
JRF
Lake Worth, US
★★★★★ 4
Cord installation is difficult but works overall
Color: White-Mount
I have 2 monitors (27” and 24”) that I attached to my Pottery Barn corner desk with the c-clamp. The installation wasn’t that difficult - at first. Then I had to store the cords and wires and the plastic backing on the arms ALMOST burst at the seams trying to hold all of them. My husband and Dad had to step in and help me get the plastic backing on the arms WHILE holding the cords in place. Once the installation was complete it worked perfectly fine. I’ve had it for 2 weeks and no issues to date. Additionally the manufacturer assumed that everyone has a CPU when MOST people use laptops because the plugs for the USB ports are attached to the backend of the device. Now I have to find a way to hide the cords. It’s a great product that is strong and seems like it will last.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 11, 2020
T
Verified Purchase
Teresa Weaver
Fort Morgan, US
★★★★★ 5
Great Dual Monitor Mount
Color: White-Mount
I bought this dual monitor arm desk mount for my wife’s computer to mount two 32” monitors. Unpacking and installation were fairly straight forward. The only two issues I had were: 1). Instructions state that this mount can be installed using a grommet hole in a desk to secure it to the desk. However, most grommet holes in desks (at least in the United States) are 2” holes. The grommet mounting option uses two all-thread bolts screwed into the base, but the outside spacing of the bolts is about 2-1/4” which, of course, is too big for 2” grommet holes. I ended up drilling two smaller holes in the desk, one for each all-thread bolt. On the plus side, this option secures the mount to the desk very securely. 2). There is no guidance in the installation instructions for optimal placement of the arm mount on the desk. I ended up temporarily installing the lower set of arms on the mount base and then experimented moving the base around the desk while swinging the arms to make sure they would clear all computer and other equipment on the desk as well as the walls. This method worked well and final placement clears everything while still giving full articulation of both arms. The unit is very heavy-duty and quality is excellent. Other than the two items mentioned above I am very impressed with this product. After installing this unit on my wife’s desk, and playing with it for a few days, I ordered one for my desk. Because of the two issues above I would give this 4-1/2 stars if I could. But these smaller issues are not enough for me to lower my rating to 4 stars, so 5 stars it is.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 20, 2021
M
Verified Purchase
Michelle L.
Chelsea, US
★★★★★ 5
Great Looking and Sturdy Monitor Arms
Color: White-Mount, Color: White-Mount
I'm so impressed with these arms. They're super strong and sturdy holding up my 27" monitor and 34" ultrawide monitor. Setting up for the most part is pretty simple and easy. One of the best things I like about these arms is the cable management. I had several arms before for my setup at home and work, and the cable covers are usually pretty flimsy and just slide and lock in. I have a lot DP and HDMI cables due to my dual workstation, so these cable covers often end up popping out since its so full. These cable covers are different since they are screwed down tight with a bolt. All my cables fit pretty snug, but there is no bulging and I don't have to worry about the covers popping off ever again. I'd recommend keeping it at a maximum of 4 thicker cables though. However, fair warning that attaching the covers can be a pain so if you have to detach cables often, the screwed in covers can be a problem. If you have a set up like mine that won't really change often, it works well. If you can, I would suggest having 2 people set up the cable management. One to hold down the cover in place and the other to screw it in. I did it myself just fine though. The range of motion is great for my needs, but please note that I tried stacking my monitors and it didn't quite work. I would say it's 1 to 2 inches shy of properly stacking them. Overall, a great looking set of dual monitor arms. The extra ports on the base are a cool feature that do work, but I haven't had much use of it yet. Love that they had a white option to match my set up too. These are a little pricey, but they're really worth it!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 21, 2021
J
Verified Purchase
Jorge Roman
Phoenix, US
★★★★★ 5
You will be hard pressed to find an equal or better product regardless of the price.
Color: Black-Mount, Color: Black-Mount
Review of AVLT Dual 13"-35" Monitor Arm Desk Mount I do not usually rate items, except for products that are exceptional or are provided by a vendor that is above all others. I looked at this item several times, because the price was $100 less than my five year old dual arm could not raise the 38” monitor more that 8” from the desk surface and barely keep my wiring hidden. Finally, the website for AVLT convinced me to place the order for the AVLT-DM41-1, Dual 13"-35" Monitor Arm Desk Mount. I was not disappointed. The quality and finish of the aluminum mount is space age quality, the manual acceptable (ilea type); most important the I can raise my 38” monitor to a perfect ergonomic height. My monitors are a Dell 38” U3818DW, (larger than 13” to 35” range) and a Dell 24” U2412M, U. for each I use the factory power cable, DP to DP display port 6 foot cables and high speed USB 3 cables for each monitor. The assembly went without a hitch, no problem hiding the heavy cables that I use, my only problem was that my was not a C-clamp, attaching the hex bolts to the base from the underside of my desk was difficult; t would had been easier had they used a stud bolts to clamp the unit down. The arm springs had no problem supporting my 38” monito, the unit is so sturdy I expect to receive years of service. I strongly recommend this item because of value, quality and design. You will be hard pressed to find an equal or better product regardless of the price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 10, 2020

recommand products